Motor RCX 2207 2400kv

  • Whatsapp

This is the Naked Based version of NK2207 manufactured with Arc N52SH Magnet, Japan EZO Bearing, 0.15mm Nippon Steel Silicon Steel and 7075 High Quality CNC Material.

  • Magnet (N52SH vs N45SH/N48SH)
  • Magnet (Arc Magnet vs Flat Magnet)
  • Bearings (Japan EZO vs NSK/NMB/China)
  • Stator Silicon Steel (0.15mm Nippon vs 0.2 China)
  • CNC Material (7075 vs 6061)

This NK2207 motor made by the top quality components so you must consider above components when you need to compare a motor. Usually the seller and factory would not provide too much information if they use the cheap components on the motor (that’s why it is cheap and you get what you pay because there is no free lunch).

Bacaan Lainnya

Specification

Model: LS2207
KV: 2400KV
Weight: Approx. 35g Only (net weight included long think 18# AWG cables)
you can lower the weight if you shorten the long AWG cables because the 18# thick cables are pretty heavy.
AWG Cable: 15cm
Prop Shaft Diameter: 5mm (CW)
Stator Diameter: 22mm
Stator Length: 7mm
Shaft Diameter: 4mm
Configuration: 12N14P
Rotor: Arc Magnets
Shaft: Titanium Alloy Hollow Shaft
Top 5mm Hollow
Bottom 4mm Solid (even more hard)
Stator: Nippon Steel Silicon Steel
Bearings: Inner Shaft 4mm Bearing 4x9x4mm
CNC Material: High Quality AL 7075
Motor Dimensions: Φ–mm
ldle Current: 0.00A @ 10V
Internal Resistance: 0.00Ω
Suitable ESC: 30-50A (depends on the propeller and battery you use)
Suitable Battery: 3-5S Li-Po (refer to thrust test table and videos)

Pos terkait